Do it yourself
Frequently asked questions about cars and motorcycles

How to Install LED Bulbs in a Volkswagen Tiguan?

Model: Volkswagen Tiguan MK 1, 5N - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

As seen in this tutorial, replacing the front headlight bulbs with LED bulbs in a Volkswagen Tiguan is a very simple and quick operation. First, ensure that the key is not in the ignition for safety, then open the bonnet and remove the large cap located at the back of the headlight.

Next, grasp the bulb holder from the flat side, turn it counterclockwise, and pull it out of the housing. At this point, remove the old bulb and insert the new one, avoiding direct contact with it using bare hands.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Volkswagen Tiguan (2007-2016 / MK 1, 5N) In this video tutorial, you can see how to install H7 LED high beam bulbs in a Volkswagen Tiguan by following a few simple steps: first, lift the bon…
Volkswagen Tiguan (2007-2016 / MK 1, 5N) In this video tutorial, you will see how to remove the interior light fittings, replacing the bulbs, on the first series Volkswagen Tiguan. First, ge…
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Today's steps will show you how to remove and replace the rear light bulb on a Volkswagen Tiguan. First, open the tailgate and start unscrewing the s…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Handbrake on a Renault Scenic

This brief video tutorial shows the necessary steps to reset the handbrake on a second-generation Renault Scenic, produced from 2003 to 2009. First, insert the key and briefly press the ignition button to turn on the vehicle's instrument cluster without starting the engine. Now, with the passenger door open, remove the key and hold down the lock button together with the start button for about five seconds. Once done, the handbrake light will start to flash. At the same time, press and pull the handbrake button and lever to complete the reset.

Watch the video!


by ScegliAuto

More videos