Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heat Exchanger on the Volkswagen Jetta 6?

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Heater core

To replace the heat exchanger on the Volkswagen Jetta 6, loosen the screws that secure the plastic panel on the right side of the driver's footwell. Once this panel is removed, you will have access to the underlying components: here you will find the plastic cover protecting the radiator, which must be removed. After removal, disconnect the pipes connected to the heat exchanger, which can then be extracted from its housing once the securing screws are removed and replaced with a new spare part.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the heat exchanger on the Volkswagen Jetta 6?
How to replace the heat exchanger on the Volkswagen Jetta 6?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the heat exchanger on the Volkswagen Jetta, open the bonnet to access the bolts securing the exchanger in the engine compartment. Next, go…
How to Replace the Heat Exchanger on a Volkswagen Jetta?
How to Replace the Heat Exchanger on a Volkswagen Jetta?
Volkswagen Jetta (1991-1998 / MK 3, A3) To access and replace the heat exchanger on a Volkswagen Jetta, it is necessary to remove the entire dashboard. Start by detaching the cover surround…
How to Replace the Heating Radiator on the Volkswagen Jetta?
How to Replace the Heating Radiator on the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the heating radiator on the Volkswagen Jetta, loosen the screws securing the plastic panel on the right side of the driver's footwell. Onc…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos