Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heat exchanger on the Volkswagen Jetta 6?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Heater core

See other generations:
Video tutorial

To replace the heat exchanger on the Volkswagen Jetta, open the bonnet to access the bolts securing the exchanger in the engine compartment. Next, go inside the cabin and remove all the plastic panels that make up the dashboard on the driver's side.

This will give you access to the exchanger, which must be disconnected from its pipes and connectors and released by loosening the securing bolts. The old exchanger can then be replaced with a new one, reassembling all previously removed parts.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Heat Exchanger on a Volkswagen Jetta?
How to Replace the Heat Exchanger on a Volkswagen Jetta?
Volkswagen Jetta (1991-1998 / A3, MK 3) To access and replace the heat exchanger on a Volkswagen Jetta, it is necessary to remove the entire dashboard. Start by detaching the cover surround…
How to Replace the Heat Exchanger on the Volkswagen Jetta 6?
How to Replace the Heat Exchanger on the Volkswagen Jetta 6?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the heat exchanger on the Volkswagen Jetta 6, loosen the screws that secure the plastic panel on the right side of the driver's footwell. …
How to Replace the Boot Release Button on the Volkswagen Jetta
How to Replace the Boot Release Button on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) This guide shows you how to remove and replace the rear boot release button on the Volkswagen Jetta. First, open the boot and start unscrewing the tw…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos