Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Antifreeze coolant

See other generations:
Video tutorial

In this tutorial, you will see how to replace the coolant in a Volkswagen Golf, a simple and quick operation. First, ensure that the engine is completely cold for safety.

Start by going underneath the vehicle, then unscrew all the indicated screws and remove the panel. Next, disconnect the lower radiator hose, allow all the fluid in the system to drain, and reconnect the hose.

At this point, you can add the necessary amount of coolant through the cap on the expansion tank.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Replacing Coolant on Volkswagen Golf Mk4
Replacing Coolant on Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this video tutorial, you will see how to replace the coolant on a Volkswagen Golf fourth series. First, remove the old coolant from the rad…
Removing the Coolant Temperature Sensor from the Volkswagen Golf 1.6
Removing the Coolant Temperature Sensor from the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, you will see the main instructions on how to remove and replace the coolant temperature sensor from the engine of the Volkswagen Golf …
How to Replace the Coolant and Hose on a Volkswagen Golf 5
How to Replace the Coolant and Hose on a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will see how to remove the lower coolant hose and replace the antifreeze on a Volkswagen Golf Mk5. First, lift the vehicle and locate the a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos