Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the Volkswagen Up?

Model: Volkswagen Up MK 1 - Years 2011-2024

If you want to connect a diagnostic tool to resolve any issues with the control unit of your Volkswagen Up but do not know where the OBD port is, do not worry as you will find all the necessary instructions below. First, reach the driver's side and ensure the car is completely off and parked safely. Next, move to the lower left area of the dashboard and locate the OBD port marked by a distinctive pink colour. Finally, connect your diagnostic tool.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Access the Internal Fuse Box and OBD Port on a Volkswagen Up
How to Access the Internal Fuse Box and OBD Port on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In a few simple steps, you will learn how to access the internal fuse box and OBD port on a Volkswagen Up. First, open the driver's side front door a…
How to Reset the "insp" Service Light on the Volkswagen Up
How to Reset the "insp" Service Light on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) This guide shows how to reset the "insp" service light for the regular maintenance oil change on the Volkswagen Up. First, get inside the vehicle and…
Where are the Fuses in the Volkswagen Up?
Where are the Fuses in the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In the Volkswagen Up, there are two fuse boxes: one in the engine compartment located above the battery, unclip the cover tabs and remove it; the oth…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos