Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Starter motor

To replace the starter motor on a Volkswagen Passat, open the bonnet to access the components inside the engine bay. The starter motor is located at the front of the engine block: remove it from its housing by loosening the screws that secure it and disconnecting its power cables. Once the device is free, you can pull it out and insert a new replacement part; ensure it is properly connected and secured.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the VW Passat
How to replace the starter motor of the VW Passat
Volkswagen Passat (2005-2010 / B6, 3C) The starter motor of the Volkswagen Passat is located inside the front hood under the engine. This same location of the starter motor is also common …
How to replace the starter motor of the Volkswagen Passat 2.0 TDI
How to replace the starter motor of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) The instructions in this guide will illustrate the steps on how to disassemble and replace the starter motor of the Volkswagen Passat 2.0 TDI. First,…
Replacing the Starter Motor on the Volkswagen Passat TDI
Replacing the Starter Motor on the Volkswagen Passat TDI
Volkswagen Passat (2010-2014 / B7) Follow the main instructions to remove and replace the starter motor on the Volkswagen Passat with a TDI engine. First, open the bonnet and start by …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos