Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the air filter on Volkswagen Polo Sedan

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Air filter
Operation: How to replace the air filter on Volkswagen Polo Sedan

If we need to replace the air filter on the car, it is necessary to follow the instructions below: First of all, open the bonnet the filter is located under the engine cover and to access it it is necessary to loosen the clamp of the air duct air and release it, then lift the engine compartment cover under it there are screws it is necessary to disassemble to access the compartment containing the filter, once the cover has been removed it is possible to extract the filter and replace it with the new one, always checking the specifications of the spare parts that are suitable for the type of car. Reposition and then close the filter cover and reassemble the engine cover and reattach the air duct.


Posted on 16 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the Volkswagen Polo air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos