Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Ignition Switch from a Volkswagen Golf?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Checks and maintenance

In this tutorial, you will see how to remove the ignition cylinder from the Volkswagen Golf. Before proceeding, disconnect the negative terminal of the battery to work safely. Start by sitting in the driver's seat, then undo the two bolts located at the rear sides of the steering wheel, remove the airbag, and disconnect the connector. Next, unscrew the steering wheel retaining nut, separate it from the steering column, and remove both control levers. Then, extract the steering lock retaining element using a puller, unscrew the lower bolt, and remove the entire module. To remove the ignition cylinder from this module, drill a hole in the indicated position and unlock the internal retaining clip.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) How do you remove the ignition switch from a Volkswagen Golf Series 4? In this video, the procedure is explained: before removing the ignition switch…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, in this video tutorial, see the necessary instructions to remove the steering wheel and ignition lock on the Volkswagen Golf fifth series. Fir…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The procedure we are about to see allows us to reset the service light on a Volkswagen Golf MK4, which is the fourth version of this model produced a…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos