Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Light Switch in the Volkswagen Transporter Van

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we will see how to replace the external light switch in the Volkswagen Transporter T5 van, a very simple and quick operation. Before doing this, ensure that the key is not inserted for safety.

Start by grasping the switch knob, then set it to the position for the dipped headlights. Pull it firmly outward to disengage it from the base.

At this point, disconnect the rear connector, connect the replacement, and insert it into the housing.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to understand the fuse diagram of a Volkswagen Transporter.
How to understand the fuse diagram of a Volkswagen Transporter.
Volkswagen Transporter (2003-2014 / T5, MK 5) The video shows the fuse diagram for a Volkswagen Transporter van. The first fuse panel features a layout where the fuses are assigned to: light cont…
How to Remove the Window Switch on a VW Transporter
How to Remove the Window Switch on a VW Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Replacing the front passenger side window switch is a straightforward task that you can do independently. To replace the switch, open the relevant do…
How to Remove the Door Panel of the VW Transporter
How to Remove the Door Panel of the VW Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Removing the door panel of the Volkswagen Transporter model T5 is a very simple operation that can be done independently. To remove the panel, first …

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2014-2025 - Where is the OBD port located on the Volkswagen Transporter? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos