Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Oil filter

Position the vehicle on suitable car ramps to facilitate access to the oil sump. Remove the plastic undertray and unscrew the drain plug from the oil sump to drain the used oil. Meanwhile, access the engine bay, remove the plastic cover, and unscrew the cap of the oil filter housing. Extract the old cartridge and insert the new one after replacing all the O-rings included with the new filter. Lightly coat the new seals with clean oil and screw the cap with the new filter back into place. Refit the plug under the oil sump and fill the engine with new oil until reaching the maximum level.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Jetta (2005-2010 / MK 5, A5) The drain plug for the used oil is located right in the centre of the oil sump: position a suitable container directly under the plug and unscrew it …
Oil Replacement on Volkswagen Jetta
Oil Replacement on Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Do you want to replace the oil in the Jetta? Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard a…
Engine Oil and Oil Filter Replacement
Volkswagen Jetta (1998-2005 / A4, MK 4) Lift the vehicle on a hydraulic lift or on suitable axle stands (if using a workshop jack, it is advisable to use a wooden block with a groove to acc…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos