Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Oil filter

See other generations:
Video tutorial

This video begins with an extensive introduction on the importance of checking the oil temperature to correctly determine its level. It then explains how to replace the oil filter on a Volkswagen Jetta.

To gain access to the engine compartment, remove the plastic cover protecting it: pull each corner of the cover towards you to detach it. Next, disconnect the air box. Using a screwdriver, disconnect the MAF sensor. With a 5 mm Allen key, remove the screw securing the air filter cover and pull it towards you to remove it. Use your fingers to also detach the tab of the air filter.

Using a spanner, also remove the gasket of the filter and the lower part of the tab. Now remove the entire air filter. You also need to remove the battery: obtain a ratchet with an extension and a 16 mm socket, along with a 10 mm spanner to remove the battery and the tray.

Now you have access to the oil filter. Remove it and compare it with the new one. Insert the new filter into its compartment.

Remember to refit its plastic cover. The final part of the video shows the old filter disassembled and not assembled.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Jetta (2005-2010 / MK 5, A5) The drain plug for the used oil is located right in the centre of the oil sump: position a suitable container directly under the plug and unscrew it …
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Jetta (1998-2005 / A4, MK 4) Position the vehicle on suitable car ramps to facilitate access to the oil sump. Remove the plastic undertray and unscrew the drain plug from the oil…
Oil Replacement on Volkswagen Jetta
Oil Replacement on Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Do you want to replace the oil in the Jetta? Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard a…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos