Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : How to replace the headlight bulb on the Volkswagen Jetta 2011

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta A6, MK 6 - Years 2010-2018
Part: Headlight bulb
Operation: How to replace the headlight bulb on the Volkswagen Jetta 2011

In this new guide of ours dedicated to your 2011 Volkswagen Jetta, we are going to describe you all the various steps necessary for you to replace your headlight bulb quickly and safely. So first you need to make sure that your car is completely switched off and parked safely. Immediately afterwards, lift the front bonnet and remove the protective cap located inside the engine compartment, in correspondence with the headlight to be replaced. Finally, unscrew the faulty bulb and replace it with a new one. Put the protective cap back on and you're done.


Posted on 19 April 2023 by ScegliAuto

This video is currently unavailable


How do you replace the Volkswagen Jetta headlight bulb?
Volkswagen Jetta (2010-2018 / A6, MK 6) Replacing the Volkswagen Jetta headlight bulb is done by opening the hood, so that you have access to the components in the rear part of the correspo
How to replace the front headlight bulb of the 2017 Volkswagen Jetta.
Volkswagen Jetta (2010-2018 / A6, MK 6) Replacing the front headlight bulb of your 2017 Volkswagen Jetta on your own is really simple, and to complete the operation, you just need to follow
How to replace the front headlight bulb of the 2011 Volkswagen Jetta.
Volkswagen Jetta (2010-2018 / A6, MK 6) If you want to replace the front headlight bulb of your sixth-generation Volkswagen Jetta (2011 model) by yourself, just follow these steps. First, m

Other guides that may interest you

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos