Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Steering Rack Tie Rod End

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Control arm

See other generations:
Video tutorial

When the tie rod end of the steering rack fails, you will notice a noise while driving over uneven surfaces and some play in the steering wheel. To replace the tie rod end, lift the vehicle on a hydraulic lift, remove the front wheel for better access (though this is not strictly necessary), and loosen the lock nut of the tie rod end on the steering rack's axial joint.

Then, unscrew the fastening nut of the tie rod end from the hub support, extract it using the appropriate tool, and note the number of turns. Screw in the new tie rod end with the same number of turns, secure the ball joint to the hub support, and tighten the lock nut. After installation, have the alignment checked.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Removing the Steering Knuckle on a Volkswagen Golf 5
Removing the Steering Knuckle on a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let’s see how to remove the steering knuckle on a Volkswagen Golf 5 Series. Position your car on a column lift, raising it to a comfortable height to…
Steering Tie Rod End Replacement Instructions
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Lift the vehicle and apply an axle stand to support it safely during disassembly. Compare the new tie rod end with the one to be removed to ensure co…
Front Wheel Bearing Replacement
Front Wheel Bearing Replacement
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the front hub bearing, it is necessary to disassemble the hub itself to position it under a hydraulic press, allowing for the removal and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos