Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

This video is a guide to replacing the catalytic converter on a Golf 5. First, switch off the car, engage the handbrake, and open the bonnet using the lever. Disconnect the battery and raise the front of the car, supporting it on axle stands.

Next, remove the undertray located beneath the engine. Unscrew the bolt from the end of the catalytic converter, open it with a screwdriver, and remove the support Silent Block plate to extract the catalytic converter itself.

Then, securely fasten the plate of the new kit. The new kit will have a coupling sleeve: use it to connect the new catalytic converter and the pipe, aligning the blue lines of these two components with the centre of the sleeve. Tighten the nuts using a spanner.

At this point, fit the metal joint onto the outlet of the catalytic converter and insert the new catalytic converter into its position. Open the new ring, fit it at the junction point, and tighten it with a 5mm spanner.

Finally, reassemble the exhaust and refit it.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's steps will show you how to remove and replace the exhaust system of the Volkswagen Golf. First, raise the vehicle and start unscrewing the nu…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Start by pressing the button located on the back of the key fob for your Volkswagen Golf to open the physical key. Then, using a flathead screwdriver…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replacing the headlight bulb of your Volkswagen Golf Mk7 is really simple, and to complete the operation correctly, you just need to follow all the s…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos