Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag Light in a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the airbag light in a Volkswagen Jetta, a very simple and quick operation to perform only after resolving the issue that caused it to illuminate. Often, it is simply the connector located beneath the passenger seat.

To do this, you will also need the scanner shown in the video. Start by connecting it to the OBD port, then turn on the ignition, activate it, and perform a scan.

Next, navigate to the general menu, select "Clear codes" and wait for the operation to complete.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Volkswagen Jetta
How to Reset the Oil Change Light on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Before starting, sit in the driver's seat of your Volkswagen Jetta. Begin by pressing and holding the "0.0" button located below the multifunction di…
How to Reset the Oil Light on a Volkswagen Jetta
How to Reset the Oil Light on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) If you own a Volkswagen Jetta and want to know the steps to manually reset the engine oil light, read this guide and follow the instructions. First, …
Where are the fuses located in the Volkswagen Jetta?
Where are the fuses located in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In the Volkswagen Jetta, all fuses are divided within the fuse boxes installed in the car: in this model, you can find two boxes for containing the f…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos