Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door of the Volkswagen Polo

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Car door

Below are the steps to remove and replace the rear door of the Volkswagen Polo, which also applies to the Seat Ibiza. First, open the rear door and unscrew the fastening bolts of the hinge using a Torx screwdriver. Next, disconnect any electrical wiring (if equipped with electric window) from the switch, as shown in the video. At this point, you can remove the old door and replace it with the new one; it is essential to align the rear door correctly to ensure it closes properly!

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Rear Door of the Volkswagen Polo?
How to Unlock the Rear Door of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To unlock the rear door of the Volkswagen Polo, you need to remove the door panel to access the lock. To do this, detach the window lift knob and loo…
How to Remove the Rear Window Regulator Handle and Mechanism on a Volkswagen Polo
How to Remove the Rear Window Regulator Handle and Mechanism on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Here are the main instructions on how to remove and replace the rear window regulator handle and mechanism on a Volkswagen Polo. First, open the rear…
How to Remove the Rear Door Panel of a Volkswagen Polo
How to Remove the Rear Door Panel of a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before you start, open the rear door of your Volkswagen Polo. Begin by removing the window lift handle by prising it off. Next, using a small flathea…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos