Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

If you have performed electrical work on your Volkswagen Polo - for example, replacing the radio - and turned on the ignition before reconnecting the airbag connector, it is likely that the airbag light remains on unnecessarily. This annoying issue can be resolved in two ways: either connect the cable to the OBD port located near the footwell, connect the corresponding USB to a laptop, and use the Volkswagen VDCS program, or purchase a diagnostic device available on Amazon for about £90, which works much more simply and immediately, as demonstrated by our YouTuber.

Select your car's make, choose whether to perform an automatic or manual scan, then search for the device you want to scan - in this case, the airbag - where an error was found. Click OK and the error will be cleared.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Briefly review the instructions that will allow you to reset the airbag light on the Volkswagen Polo by following these simple steps. To reset the ai…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the airbag warning light on the vehicle, follow the procedure below: use a diagnostic system that connects to the OBD2 port of the car locat…
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) How do you remove the steering wheel from a Volkswagen Polo? Follow these steps for removal. Before removing the steering wheel, insert a screwdriver…

    Frequently Asked Questions

    • Polo 2017-2025 - The EPC light of the Volkswagen Polo 1.0 TSI Sport BMT is on, what can I do? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos