Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : Replacing the glow plugs of a Volkswagen Golf 7 1.6 TDI

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Glow plugs
Operation: Replacing the glow plugs of a Volkswagen Golf 7 1.6 TDI

To replace the glow plugs of the engine of a Volkswagen Golf 7 1.6 TDI we must first of all open the bonnet by pulling the appropriate release lever inside the passenger compartment and then lift it, then we remove the engine cover and done this we immediately in front of the four glow plugs. Now let's remove the ignition coils of the glow plugs using special pliers to avoid damaging them, then with a 10mm socket wrench we go to unscrew the glow plugs, we carry out this operation very carefully to avoid breaking the glow plugs. Once all the glow plugs have been removed, we can replace them with new glow plugs by following the reverse procedure.


Posted on 1 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - What to do if the glow plug warning light flashes on the Volkswagen Golf 7? Read Answer
    • Golf 2008-2012 - What to do when the glow plug light flashes on Volkswagen Golf 6? Read Answer
    • Golf 1997-2003 - What is the glow plug indicator in the Volkswagen Golf 4? Read Answer
    • Golf 2008-2012 - What does the illumination of the glow plug light on my Volkswagen Golf 6 mean? Read Answer
    • Golf 2012-2019 - What does the flashing glow plug light mean on the Golf 1.6 TDI? Read Answer
    • Golf 2008-2012 - What does the Volkswagen Golf 6 glow plug light mean? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos