Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to replace the cabin filter on a Volkswagen Golf 7.

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years 2012-2019
Part: Cabin air filter
Operation: How to replace the cabin filter on a Volkswagen Golf 7.

In this video tutorial, we can see how to replace the cabin filter on a Volkswagen Golf 7. The first thing to do is to purchase a new cabin filter. The next step is to get into the car, engage the handbrake and open the glove compartment. Press down the glove compartment locks to release it from its position; once it is lowered, we can see the cabin filter box. Now, we need to unclip the three clips of the cabin filter cover, remove the old filter and clean the box with a clean cloth and apply a sanitizing product both on the filter and inside the housing. Position the new cabin filter and reassemble all the parts in reverse order.


Posted on 1 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - Where is the VW Golf 7 pollen filter located? Read Answer
    • Golf 2008-2012 - Where is the VW Golf 6 pollen filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos