Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to replace the rear lights on a Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Tail light
Operation: How to replace the rear lights on a Volkswagen Polo?

As we can see in this tutorial, replacing the rear lights in the Volkswagen Polo is an extremely simple and quick operation. Before proceeding, make sure that the key is not inserted in order to operate safely. Let's start by opening the trunk, then we open the small housing located on the back of the light to be removed and unscrew the large white plastic bolt. Once this is done, we grab the light, pull it towards us and remove it from the body. Finally, we disconnect the suction connector and install the replacement by following the reverse procedure.


Posted on 13 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos