Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the alarm of the Volkswagen Touran?

Model: Volkswagen Touran MK 1, 1T - Years 2003-2015
Part: Checks and maintenance

To deactivate the alarm of the Volkswagen Touran, connect a diagnostic tool to the vehicle's OBD port: in this model, the port is located at the bottom left of the dashboard relative to the steering column. Once the scanner is connected, select the model of the car and the corresponding version: at this point, you can perform all operations for deactivating the alarm. You can then verify that it has been deactivated by pressing the appropriate button on the remote.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volkswagen Touran
How to Reset the Service Light on a Volkswagen Touran
Volkswagen Touran (2003-2015 / MK 1, 1T) If you have carried out the regular service on your first-generation Volkswagen Touran (2003-2015) and the warning light remains illuminated, don't w…
Where to Find the Fuse Box on a Volkswagen Touran Mk2
Where to Find the Fuse Box on a Volkswagen Touran Mk2
Volkswagen Touran (2015-2024 / 5T, MK 2) In the event of electrical faults affecting one or more components in your Volkswagen Touran Mk2, you will need to address the respective fuses. With…
How to Replace the Timing Belt on a Volkswagen Touran?
How to Replace the Timing Belt on a Volkswagen Touran?
Volkswagen Touran (2003-2015 / MK 1, 1T) Good morning, today you will be replacing the timing belt on your Volkswagen Touran. Start by opening the bonnet. Next, remove the air filter assembl…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos