Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace fog lights in a Volkswagen Polo.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK 6, AW1, Polo VI, MK VI, Polo 6 - Years 2017-2024
Part: Fog lights
Operation: How to replace fog lights in a Volkswagen Polo.

In the following video, we will see how to replace the fog lights on a Volkswagen Polo. It is a very simple job that does not require any special tools. First, we turn on our car. We turn the steering wheel so that the wheel on the side where we will be working is facing the opposite direction (for example, if we are working on the left fog light, the wheel should be turned to the right). This will allow us to see the compartment from which we will replace our fog light. We unscrew it counterclockwise. We unscrew the connector and then the bulb by turning it counterclockwise. We remove the bulb and replace it with the new one. Now we can proceed with the reverse procedure to close the fog light compartment and the job is done.


Posted on 15 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - How do the Volkswagen Polo fog lights come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos