Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in a Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial, we will see how to remove the instrument cluster in a Volkswagen Tiguan, a very simple and quick operation. First, ensure the key is not in the ignition, then fully lower the steering wheel and, using a plastic spatula, remove the upper cover of the steering column.

Next, unclip the entire front panel containing the air vents, unscrew the two screws indicated with a Torx T20 screwdriver, and extract the instrument cluster from the dashboard. At this point, simply disconnect the connectors and install the replacement if necessary.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster on the Volkswagen Tiguan
How to Remove the Instrument Cluster on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this video, you will find the main instructions on how to remove and replace the instrument cluster on the Volkswagen Tiguan in simple and quick s…
How to Dismantle the Instrument Cluster of a Volkswagen Tiguan?
How to Dismantle the Instrument Cluster of a Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Good morning, today’s objective is to dismantle the instrument cluster of our Volkswagen Tiguan. Start by sitting in the driver’s seat of the vehicle…
How to Remove the Starter Motor from a Volkswagen Tiguan
How to Remove the Starter Motor from a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Before starting, open the bonnet of your Volkswagen Tiguan. Begin by removing the entire air filter housing, disconnecting the hoses and unscrewing t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos