Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Pump Located on a Volkswagen Passat?

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Fuel pump

In this video, you will see where the fuel pump is located on a Volkswagen Passat and how to replace it, a very simple task. As shown, it is situated in the rear of the vehicle, specifically beneath the right seat. To replace it, first disconnect the negative terminal of the battery, then lift the seat cushion and tilt it forward. Next, remove the covering carpet, open the large circular cap, and disconnect the power connector. At this point, simply disconnect both fuel lines, unscrew the outer ring, and extract the pump.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fuel Pump on a Volkswagen Passat
How to Change the Fuel Pump on a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) In this video tutorial, you will learn how to remove and replace the fuel pump on a Volkswagen Passat by following these simple steps. First, open th…
How to Replace the Fuel Pump on a Volkswagen Passat?
How to Replace the Fuel Pump on a Volkswagen Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) To replace the fuel pump on a Volkswagen Passat, open the boot and remove the carpet that serves as flooring. Beneath it, there will be a cover prote…
Removing Fuel Pump Relay from Volkswagen Passat
Removing Fuel Pump Relay from Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Today, locate the fuel pump relay and remove it from a second series Volkswagen Passat. First, open the bonnet: it is necessary to remove the fuel pu…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos