Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

Before proceeding with the removal of the car radio, make sure to note any necessary unlock codes for subsequent activation. Next, remove the trim surrounding the controls of the central console and the radio by unclipping it along the edges.

To facilitate the removal of the trim, shift the gear lever backwards. Once the trim is unclipped, disconnect the climate control switches and complete the removal of the radio by unscrewing the fixing screws, then extract it from its slot and disconnect the connectors.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Volkswagen Jetta (2005-2010 / MK 5, A5) The first operation is to detach the upper grille located at the centre of the dashboard; then unscrew the fixing screws of the underlying support an…
How and when to replace the timing belt of the Volkswagen Jetta 1.9 TDI
How and when to replace the timing belt of the Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (1998-2005 / A4, MK 4) In this guide, we will see the main instructions for disassembling and replacing the timing belt of the Volkswagen Jetta 1.9 TDI; the service manual …
Instructions for Removing the Instrument Cluster
Instructions for Removing the Instrument Cluster
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the instrument cluster, first detach the trim surrounding it, which integrates the air vents and the upper shell covering the light switch …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos