Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the ceiling light of the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Interior lights ceiling light bulb
Operation: How to remove the ceiling light of the Volkswagen Polo?

In this tutorial, we can see how to disassemble the ceiling light in the Volkswagen Polo 6R, which is a very simple and quick operation. To do this, we will need a Torx T20 screwdriver and a preferably plastic spatula, so as not to cause any damage. First of all, we remove the transparent diffuser panel, then we unscrew the two screws located internally. Once we have done this, we disconnect the power connector and proceed with the replacement by following the reverse procedure. In case we need to replace a bulb, we use an LED replacement.


Posted on 24 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Why don't the Volkswagen Polo interior lights work? Read Answer
    • Polo 2001-2009 - Why do the interior lights on my Volkswagen Polo Mk4 no longer work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos