Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : The replacement of the air filter in a Volkswagen Polo IV 9N.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Air filter
Operation: The replacement of the air filter in a Volkswagen Polo IV 9N.

In this video tutorial, we can see how to replace the air filter in a Volkswagen Polo IV 9N by following a few simple steps: the first thing we need to do is to purchase a new air filter from an authorized dealer; the next step is to get into the car, turn off the engine, and engage the handbrake. Lift the hood and secure it with a prop rod. Use a star screwdriver to remove the fasteners of the filter box. Lift the cover of the filter box; remove the old filter and then clean the housing and cover to remove any dirt present. Insert the new filter (it is important to reintroduce it the way it was before), position the cover, and screw the screws back in with the star screwdriver.


Posted on 8 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the Volkswagen Polo air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos