Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on the Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

In today's video, we will see how to replace the front bulbs on the Volkswagen Passat. It is advisable to work with a cold engine, so ensure the vehicle has been stationary for a while to avoid burns.

Start by opening the front bonnet using the lever inside the car. Remove the rubber cover that protects the bulbs, then disconnect the power connector. Next, extract the bulb you wish to replace and proceed to install the new one. To remove the fog light bulbs, you need to remove the cover by unclipping it from the front.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Replacement of the rear headlight bulbs of the Volkswagen Passat
Replacement of the rear headlight bulbs of the Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) In this short and simple guide, we will see the instructions on how to disassemble and replace the bulbs of the rear headlight of the Volkswagen Pass…
How to Replace the Interior Light Bulbs on a Volkswagen Passat B6
How to Replace the Interior Light Bulbs on a Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) Let’s go through the main steps to remove the interior light unit to replace the bulbs on a Volkswagen Passat B6. First, get inside the car and use a…
How to Replace Xenon Bulbs in a Volkswagen Passat?
How to Replace Xenon Bulbs in a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, we will see how to replace the Xenon bulbs in a Volkswagen Passat B6. For this operation, you must first remove the bumper and then…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos