Do it yourself
Frequently asked questions about cars and motorcycles

Lock Repair Instructions

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door lock

See other generations:
Video tutorial

If the interior lights remain on even when the doors are closed, it means that the micro switch integrated in the lock is no longer functioning and cannot signal to the comfort module that the door is closed; this is a common fault in many Volkswagen models, so much so that many aftermarket parts manufacturers have introduced a rebuilt lock at very competitive prices; however, if you want to attempt the repair, purchase a new micro switch, remove the lock by taking off the door panel and then disassemble it completely until you reach the electronic board integrated in the lock itself and replace the micro switch by desoldering the old one and soldering in the new one.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today, we will explain how to access the Volkswagen Passat when the remote battery is dead. To access the vehicle when the remote battery is dead, yo…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today we will explain how to replace the door handle of the Volkswagen Passat. To perform this simple operation, in addition to purchasing a new hand…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) In this video tutorial, you will learn how to remove and replace the boot lock on a Volkswagen Passat B8. First, open the boot and start by removing …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos