Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn on the Main Beam Lights of the Volkswagen T-Cross

Model: Volkswagen T Cross MK 1 - Years 2019-2026
Part: Checks and maintenance

Today's guide will show you how to use and turn on the dipped and main beam lights of the Volkswagen T-Cross. First, get inside the vehicle and start the engine; then turn the light switch knob located on the left side. This will give you access to all the position lights and dipped beams, as shown in the video. At this point, you can turn on the main beam lights using the left stalk on the steering wheel by pushing it forward; conversely, you will deactivate the lights, following the video tutorial until the end!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate the light assist on the Volkswagen T-Cross
How to activate the light assist on the Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. activation of high beams, on the Volkswagen T-Cross. The light assist function is an option and therefore may not be present on all trim levels; first.. …
How to reset the Climatronic on a Volkswagen T-Cross?
How to reset the Climatronic on a Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. Climatronic system present on the Volkswagen T-Cross can be reset by turning on the instrument panel, inserting the ignition key into the corresponding.. …
How to reset the service reminder on the Volkswagen T-Cross
How to reset the service reminder on the Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. for the engine oil change of the Volkswagen T-Cross. First, we get into the car and start the instrument panel; use the steering wheel controls to.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Volkswagen T Cross 2019-2026 - When is the Volkswagen T Cross first serviced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos