Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : Disassembly and replacement of the particulate filter

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Particulate filter
Operation: Disassembly and replacement of the particulate filter

Remove the plastic cover inside the hood and near the passenger seat by unscrewing the plastic screw above it. Remove it by gently pulling towards you. We see the filter under the plastic strip. It is extracted by pulling it out under the plastic strip that covers it. Remove any debris and impurities trapped in the duct. Insert the new filter according to the direction indicated: the ears go downwards. Insert the filter in its seat making it enter first from the driver's side. At this point you can reassemble the cover and screw in the screw. VW Passat 2002


Posted on 23 June 2023 by ScegliAuto



Engine air filter replacement
Volkswagen Passat (2005-2010 / 3C, B6) Periodic replacement of this filter is recommended in order to keep the engine efficiency high. Open the engine hood and locate the filter canister l
How to replace the diesel filter on Vw Tiguan
Volkswagen Passat (2010-2014 / B7) The diesel filter must be replaced every time the car is serviced. Let's see the disassembly on a Passat. We lift the front hood of the engine, locat
Cabin pollen filter replacement
Volkswagen Passat (1996-2005 / 3BG, B5) The pollen filter purifies the air in the passenger compartment and is located in the engine compartment under the windscreen. For the replacement it

    Frequently Asked Questions

    • Passat 2010-2014 - Where is the VW Passat 2015 AdBlue tank located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos