Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Volkswagen Passat TDI

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Starter motor

Follow the main instructions to remove and replace the starter motor on the Volkswagen Passat with a TDI engine. First, open the bonnet and start by removing the upper plastic cover, disconnecting and then removing the battery. Next, remove the battery tray to access the starter motor, as shown in the video. At this point, disconnect the wiring and unscrew the fixing bolts using a socket spanner to remove it and replace it with the new original one, applying the reverse procedure for reassembly!

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the starter motor for the Volkswagen Passat 1.6 TDI.
Replacement of the starter motor for the Volkswagen Passat 1.6 TDI.
Volkswagen Passat (2005-2010 / B6, 3C) Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Volkswagen Passat 1.6 TDI. First, let'…
How to replace the starter motor of the Volkswagen Passat 2.0 TDI
How to replace the starter motor of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) The instructions in this guide will illustrate the steps on how to disassemble and replace the starter motor of the Volkswagen Passat 2.0 TDI. First,…
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Replacement of the timing belt of the Volkswagen Passat 2.0 TDI
Volkswagen Passat (2010-2014 / B7) Today's main instructions will show us how to disassemble and replace the timing belt of the Volkswagen Passat 2.0 TDI. First, we open the hood of th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos