Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Volkswagen Caddy Van?

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulbs on a Volkswagen Caddy van, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not in the ignition, then open the tailgate and remove the plastic cover located on the inner edge of the light unit.

Next, unscrew the two indicated screws using a Torx T25 spanner, grasp the light and pull it out from the bodywork. At this point, disconnect the power connector, open the internal base, and replace the faulty bulb.

To reassemble everything, simply follow the reverse procedure.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Volkswagen Caddy Van?
How to Replace the Rear Light Bulbs on a Volkswagen Caddy Van?
Volkswagen Caddy (2003-2020 / 2K, MK 3) .. In this tutorial, you will see how to replace the rear light bulbs on a Volkswagen Caddy van, a very simple and quick operation. First,.. …
How to remove the rear lights on the Volkswagen Caddy van?
How to remove the rear lights on the Volkswagen Caddy van?
Volkswagen Caddy (2003-2020 / 2K, MK 3) Removing the rear lights on the Volkswagen Caddy van, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the k…
How to Reset the Tyre Pressure Light on a Volkswagen Caddy Van?
How to Reset the Tyre Pressure Light on a Volkswagen Caddy Van?
Volkswagen Caddy (2020-2026 / SB) In this tutorial, you will see how to reset the tyre pressure light on a Volkswagen Caddy van, a very simple and quick operation. Before doing this, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos