Do it yourself
| ||||
|
Volkswagen Jetta - Video tutorial
Model: Volkswagen Jetta
A6, MK 6
- Years 2010-2018 The guide shows you how to properly replace the speakers in your car. You will first need a drill, screwdrivers and a utility knife or cable shears. After doing this, you will need to remove the grilles in front of the speakers. To proceed with the removal of the old speakers, you will need to start by using a screwdriver to remove the screws that secure the grilles. After removing these, you will have to use the second tool or the screwdriver. The latter, you will need to remove the screws that secure the speaker. Once you get to this point, continue cutting the speaker gasket. Once all this is done, you will have to unplug all the wiring coming from the speakers here too be very careful to be precise. This will allow the new speakers to be installed in the doors.
Posted on 16 September 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |