Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Diagram for the Volkswagen Transporter

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Fuse box

The fuses in the VW T5 are usually located under the driver's seat. The exact assignment may vary slightly depending on the vehicle's equipment and year of manufacture. However, here is a typical fuse assignment for the VW T5: Fuse 1 - Empty
Fuse 2 - Empty
Fuse 3 - Empty
Fuse 4 - Engine management electronic control unit
Fuse 5 - Empty
Fuse 6 - Interior light, central locking fuse
Fuse 7 - Instrument cluster, airbag control unit fuse
Fuse 8 - ABS, ESP, stop light fuse
Fuse 9 - Heating, air conditioning, wiper fuse
Fuse 10 - Radio, multimedia system fuse
Fuse 11 - Trailer socket fuse
Fuse 12 - Rear wiper fuse
Fuse 13 - Auxiliary heating fuse
Fuse 14 - Onboard network control unit fuse
Fuse 15 - Boot power supply fuse
Fuse 16 - Empty
Fuse 17 - Empty
Fuse 18 - Driver's seat heating fuse.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (1990-2003 / T4, MK 4) .. access the internal fuse box and how to find the fuse diagram for the Volkswagen Transporter. First, we open the front door on the driver's side and start.. …
Volkswagen Transporter (1990-2003 / T4, MK 4) In this guide, you will find information regarding the diagram and positioning of the internal fuse box of the Volkswagen Transporter. First, open th…
Volkswagen Transporter (2003-2014 / T5, MK 5) Today's guide will show you the wiring diagram and fuse layout for the Volkswagen Transporter, following these simple and quick steps. The wiring dia…

Other guides you may be interested in

    Frequently Asked Questions

    • Transporter 2003-2014 - Where is the cigarette lighter of the Volkswagen Transporter T5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos