Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Volkswagen Touareg

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Front bumper

This guide will show you how to remove and replace the front bumper of the Volkswagen Touareg. First, open the bonnet and start by removing the grille or bumper cover, unscrewing the fastening screws located at the top. Then, unscrew the additional screws of the front bumper to detach it from the sides until it is completely removed, as shown in the video. At this point, install the new front bumper with its cover by applying the reverse procedure of disassembly!

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Bumper from a VW Touareg
Removing the Bumper from a VW Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) To remove the bumper from a Volkswagen Touareg, lift the bonnet and secure it. Raise the vehicle with a jack. Remove the fastening rivets (screws) lo…
How do you replace the headlight bulb of the Volkswagen Touareg?
How do you replace the headlight bulb of the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) The replacement of the front headlight bulb of the Volkswagen Touareg is carried out by opening the hood and then removing the wheel arch trim of the…
Removing the Rear Bumper from the Touareg
Removing the Rear Bumper from the Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) How do you remove the rear bumper from the Touareg? Lift the tailgate and see how it comes off. Undo the screws for the lights and remove both of the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos