Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Badge from the Front Bumper of a VW Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Manufacturer emblem

Removing the manufacturer's badge from the front bumper of a Volkswagen Golf 5 is a simple task you can do yourself, aided by our brief video tutorial. To remove the Volkswagen badge, insert your hand inside the badge and rotate it clockwise until you hear a click, then disconnect the connector and remove it. To insert the same badge or a new one, repeat the process but rotate it counter-clockwise until you hear a click. This operation is often performed when removing the front bumper to access the headlights more easily.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Badges on a Volkswagen Golf
How to Replace the Badges on a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The steps outlined in this guide will show you the procedure for removing and replacing the manufacturer badges (both front and rear) on a Volkswagen…
How to Remove the Manufacturer's Badge from a Volkswagen Golf
How to Remove the Manufacturer's Badge from a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Let's briefly go through the steps to remove and replace the front manufacturer's badge on a Volkswagen Golf, GTI version. First, move to the front o…
Removing the Front Bumper on Golf 4
Removing the Front Bumper on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Replacing the front bumper on the Golf 4? Not sure how to do it? Unscrew the fastening bolts located at the top of the bumper (after removing the fro…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos