Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

The procedure to reset the Service light on a Volkswagen Polo involves pressing the button located immediately below the instrument cluster on the central right side marked 0.0/SET, and then turning the key to switch on the instrument cluster. After performing these two actions, wait a few seconds while releasing the button, noting that the spanner light will still be on. Then, press the other button in the centre of the instrument cluster, and the Service light will disappear.

At this point, you can completely switch off the instrument cluster by turning the key.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To reset the Service light on a Volkswagen Polo, you need to turn on the instrument cluster so you can navigate through the menu options on the onboa…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To reset the Service light in a Volkswagen Polo, press the button located just below the instrument cluster on the left side while inserting the key …
How to Reset the Service Light on the Volkswagen Polo 5?
How to Reset the Service Light on the Volkswagen Polo 5?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the Service light on the Volkswagen Polo, turn on the ignition and then press the button to the left of the instrument cluster four times: t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos