Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Number Plate Light

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: License plate light

See other generations:
Video tutorial

A simple task like this can save you time and money if you dedicate a few minutes of your day to follow this brief and straightforward guide. You won’t need any special tools; to replace this light, simply use a flathead screwdriver, preferably with a plastic head to avoid scratching the bodywork or protective plastic.

Once removed, you can easily disconnect the plug at the back and install the new light by reconnecting it to the connector. Reverse the steps for reassembly.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Sharan
How to Remove the Rear Bumper of a Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) Do you want to remove the rear bumper of your Volkswagen? Follow this guide to proceed. First, open the tailgate of the boot, then access the inspect…
Rear Light Bulb Replacement
Rear Light Bulb Replacement
Volkswagen Sharan (1995-2010 / 7M, MK 1) Each rear light consists of two elements, one fixed to the tailgate and the other attached directly to the bodywork. To check the condition of the bu…
Replacing the Timing Belt on the Volkswagen Sharan 2.0 TDI
Replacing the Timing Belt on the Volkswagen Sharan 2.0 TDI
Volkswagen Sharan (2010-2023 / 7N, MK 2) In this brief guide, discover the instructions for removing and replacing the timing belt on the Volkswagen Sharan 2.0 TDI. First, open the vehicle's…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos