Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Side mirror

See other generations:
Video tutorial

Below are the main instructions for removing and replacing the external wing mirror on a Volkswagen New Beetle. First, open the front door of the vehicle and start by removing the door panel; then unscrew the screws of the external wing mirror, disconnecting the adjustment connector to remove it, as shown in the video.

At this point, replace and install the new wing mirror, securing it properly to the hinge, and finally adjust the glass and reassemble the door panel!


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Remove the External Rear-View Mirror of the Volkswagen New Beetle
How to Remove the External Rear-View Mirror of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the external rear-view mirror of the New Beetle, start by taking off the door trim panel. Remove the handle cover to access the fastening s…
Removing the Wing Mirror from a Volkswagen New Beetle
Removing the Wing Mirror from a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this video tutorial, you will learn how to remove the external wing mirror from a Volkswagen New Beetle. First, open the door and remove the trim …
Guide to Removing the Wing Mirror on the Volkswagen New Beetle
Guide to Removing the Wing Mirror on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this guide, learn how to remove and replace the external wing mirror on the Volkswagen New Beetle, following these simple steps. First, open the f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos