Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Tiguan
  6. : How to replace the battery of the Volkswagen Tiguan 2014 key

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Key
Operation: How to replace the battery of the Volkswagen Tiguan 2014 key

Replacing the button battery inside the key of your 2014 Volkswagen Tiguan is one of the simplest operations to perform even independently, and you just need to follow the following steps to complete it without any difficulty. First of all, make sure you have purchased a new perfectly compatible battery, then remove the back cover of the remote and then remove the old button battery. Finally, insert the new one and correctly reassemble the remote cover that you removed earlier.


Posted on 3 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Tiguan 2016-2025 - Why is the start button of the Volkswagen Tiguan not working? Read Answer
    • Tiguan 2016-2025 - Why is the Volkswagen Tiguan key not being detected? Read Answer
    • Tiguan 2016-2025 - How to change the battery of the 2020 Volkswagen Tiguan key? Read Answer
    • Tiguan 2016-2025 - Why doesn't the Volkswagen Tiguan remote control work? Read Answer
    • Tiguan 2016-2025 - What to do if the Volkswagen Tiguan does not open? Read Answer
    • Tiguan 2016-2025 - What to do if the Volkswagen Tiguan door locks? Read Answer
    • Tiguan 2016-2025 - How do you open the Volkswagen Tiguan without the remote control? Read Answer
    • Tiguan 2016-2025 - Why does the Volkswagen Tiguan remote control not work? Read Answer
    • Tiguan 2016-2025 - What to do when the door of the Volkswagen Tiguan does not open? Read Answer
    • Tiguan 2007-2016 - Tiguan key does not work, what to do? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos