Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : How to adjust the time in the Volkswagen Sharan?

Volkswagen Sharan - Video tutorial

Model: Volkswagen Sharan MK 2, 7N - Years 2010-2023
Part: Checks and maintenance
Operation: How to adjust the time in the Volkswagen Sharan?

In this tutorial we can see how to adjust the time in the Volkswagen Sharan, an extremely simple and quick operation, to be carried out for example after disconnecting the battery or following the switch to daylight saving time. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, activate the time adjustment by pressing the button on the left side of the dashboard, adjust it with the right button and move on to the minutes by pressing the left button again. In the same way, we can both adjust the minutes and save the setting.


Posted on 8 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Sharan 2010-2023 - How to unlock the trunk of the Volkswagen Sharan? Read Answer
    • Sharan 1995-2010 - Where is the tire repair kit located in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read Answer
    • Sharan 2010-2023 - How to remove the AdBlue warning light in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - What problems have been encountered with the Volkswagen Sharan AdBlue system? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos