Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the headliner in the Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this tutorial, we can see how to remove the headliner in the Volkswagen Golf, an extremely simple and quick operation. First of all, let's go inside the cabin, then lower both sun visors and remove them by unscrewing the respective fixing screws. Next, we detach the frame of the front light, remove the internal frame, and continue by removing all the side handles. At this point, we can grab the headliner, pull it down, and separate it from the roof. To install the replacement, simply follow the reverse procedure.

Posted on 14 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are step-by-step instructions on how to remove and replace the headlining of the Volkswagen Golf. First, get inside the vehicle and start remov…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In the Volkswagen Golf 5, it is quite common for the headlining to detach, ruining the aesthetics. Replacement is possible as a DIY task without goin…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To remove the headlining on a Volkswagen Golf, start by unscrewing the side handles with a screwdriver. Next, remove the sun visors and the overhead …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos