Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wipers of the Golf 7.

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years 2012-2019
Part: Windshield wipers

In this video, it is shown how to replace the windshield wiper blades of the Volkswagen Golf 7. This procedure is useful when the blades start to not work properly anymore. To replace the windshield wiper blades, you must position the blades facing upwards. To do this, you must turn off the car and then activate the windshield wiper command, which will lock when it reaches the top. At this point, you must lift the blades. Once lifted, you must press the button on the blade and pull it upwards to remove it. Once the old blade is removed, simply insert the new blade by sliding it into its housing and once inserted, place it on the windshield.

Posted on 14 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf wiper relay replacement
Volkswagen Golf wiper relay replacement
Volkswagen Golf (1997-2003 / MK 4, Golf IV, Golf 4) In this guide we will see the procedure that will allow us to disassemble and replace the Volkswagen Golf wiper relay. First of all, we get on board …
Replacing the glass brushes on Vw Golf 5
Replacing the glass brushes on Vw Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf V, Golf 5) Let's see the replacement of the wiper blades on the Golf 5. We replace the damaged wiper blades. Take the front brush (to be replaced) with your han…
Removing the Golf 5 wiper blade
Removing the Golf 5 wiper blade
Volkswagen Golf (2003-2008 / MK 5, Golf V, Golf 5) Removing the damaged windshield wiper blade of the Volkswagen Golf 5? Let's see how it disassembles. We raise the wiper arm: we detach the blade from…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos