Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. T Cross
    4. : Air filter replacement for the Volkswagen T-Cross

Volkswagen T Cross - Video tutorial

Model: Volkswagen T Cross MK 1 - Years 2019-2024
Part: Air filter
Operation: Air filter replacement for the Volkswagen T-Cross

As provided by the Volkswagen T-Cross maintenance plan, we periodically need to replace the air filter for the engine to function properly. Opening the hood of the engine compartment, we will find the filter box in front of us: We start by removing the small vent tube, then loosen the clamp of the inlet tube with the help of pliers and disconnect it. We repeat the same procedure for the outlet tube, which is complicated by the narrow space. Using a Torx T30 key, we unscrew the screw on the front edge of the filter box, lift and rotate the box. Using a Torx T25 key, we unscrew the screws that hold the filter cover, open it and replace the old filter element, replacing it with a new one and ensuring the rubber edge adheres well. Put the cover back on and tighten the screws, place the box back in its position, reconnect the outlet tube, the inlet tube, the vent tube, and secure everything with the screw on the edge.


Posted on 18 April 2024 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos