Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the intake manifold of the Volkswagen Golf?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Checks and maintenance

In order to replace the intake manifold of the Volkswagen Golf, you need to open the hood so that you can access the components located inside the engine compartment: once the hood is open, you will be able to see the manifold in the front part of the engine block. By loosening all the screws that hold it in place, both on the engine block and on the air duct, you will be able to remove it from its housing, also removing any connectors and cables. At this point, you can insert the new manifold into its housing, securing it properly and checking that everything works.

Posted on 1 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In today’s video, we will see how to clean the intake manifold of a fifth-generation Volkswagen Golf. This operation can be performed on multiple veh…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Here is the video guide to understand where to intervene and what to do to change the intake manifold gaskets. As shown in the images, take the compl…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The intake manifold is a crucial component of your car as it collects carbon monoxide and other harmful gases produced and disperses them into the en…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos