Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the rear bumper of the Volkswagen Polo MK5

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Rear bumper

See other generations:
Video tutorial

If the rear bumper of the Volkswagen Polo is damaged due to a collision with an obstacle or contact with another vehicle, after removing the damaged one, follow these steps to fit the new rear bumper. Insert the new bumper into position, aligning the clips with the height of the lights and secure them by pressing from the outside.

Tighten the two securing screws using a socket spanner in the section inside the two wheel arches to complete the operation. Check that the alignments are correct.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Volkswagen Polo
How to Remove the Rear Bumper of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's step-by-step instructions will show you how to remove and replace the rear bumper of the Volkswagen Polo. First, move to the rear of the vehi…
How to replace the rear bumper of the Volkswagen Polo
How to replace the rear bumper of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's instructions will show us how to disassemble and replace the rear bumper of the Volkswagen Polo, in simple steps. First, we open the rear hat…
How to Remove the Rear Bumper of the Volkswagen Polo?
How to Remove the Rear Bumper of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To remove the rear bumper of the Volkswagen Polo, first remove the rear lights from their housing: open the boot and take off the internal trim panel…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos