Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

Today, we will look at the instructions that will allow you to reset the tyre pressure warning light on a Volkswagen Polo; before executing the reset, it is necessary that all four tyres are at the correct operating pressure. So, get in the vehicle and switch on the instrument panel; you will see the TPMS light appear on the dashboard.

At this point, open the glove compartment and press and hold the TPMS reset button for a few seconds; if the pressures are correct, the light will reset once the button is pressed, then start the engine.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To reset the tyre pressure warning light on the Volkswagen Polo, inflate the tyres until they reach the recommended pressure value: this value is fou…
How to Reset the Tyre Warning Light on a Volkswagen Polo
How to Reset the Tyre Warning Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the tyre warning light on your Volkswagen Polo, you need to perform a simple and quick manual reset procedure, which we will discover below.…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To completely clear the tyre pressure warning light displayed on the Volkswagen Polo, inflate the tyres to the recommended pressure value: this is in…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - How do you reset the Volkswagen Polo tire pressure warning light? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos