Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this useful video tutorial, you will see how to replace the cabin air filter on a Volkswagen Polo, fifth generation, produced from 2009 to 2017. This is a very simple operation that you can do entirely on your own without going to a specialist. The filter is located under the dashboard on the passenger side, near the centre tunnel.

To replace it, first move some of the upholstery and remove the cover by pushing the two tabs towards the centre as shown in the video. Once done, you can remove the old filter and replace it with a new one.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Heater Filter on a Volkswagen Polo
How to Replace the Cabin Heater Filter on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Before you can begin, open the front passenger door of your Volkswagen Polo. Start by unfastening the clips that secure the cabin heater filter cover…
Replacement of the cabin air filter of the Volkswagen Polo 1.2 TSI
Replacement of the cabin air filter of the Volkswagen Polo 1.2 TSI
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's instructions will allow us to remove and replace the cabin air filter of the Volkswagen Polo 1.2 TSI. First, we open the hood of the car and …
How to replace the cabin air filter of the Volkswagen Polo 4.
How to replace the cabin air filter of the Volkswagen Polo 4.
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The cabin air filter of the Volkswagen Polo MK4 model is located inside the cabin, specifically under the dashboard on the passenger side. To replace…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos