Do it yourself
Frequently asked questions about cars and motorcycles

How to change the cabin air filter of the Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Cabin air filter

On the Volkswagen Polo, the cabin air filter is accessed from the passenger side, under the dashboard, near the glove compartment. Work with the vehicle off and ventilation turned off to avoid air system movements while your hands are in the area. Go to the passenger footwell and locate the cover of the filter housing. Unlock the closure tab and open the cover just enough to free the opening. At this point, pull out the used filter by gently pulling it outwards, avoiding shaking it to prevent dust from falling. Before inserting the replacement, ensure the housing is clean and free of debris. Insert the new filter respecting the indicated direction, push it in until it is seated without bending it more than necessary, then close the cover and check that the tab has returned to the locked position. Finally, turn the ventilation back on and check that the airflow is regular and without unusual noises.

Posted on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The cabin air filter of the Volkswagen Polo MK4 model is located inside the cabin, specifically under the dashboard on the passenger side. To replace…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Periodically replacing the cabin air filter in your Volkswagen Polo 9N is very important to maintain a high level of air quality. Below, you will dis…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To replace the cabin air filter or pollen filter on a Volkswagen Polo 4 model 9N, follow these steps: - Park the car on level ground; - Open the pass…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos